Search page
We found 2005 search results.
Narrow the search result by using the filters.
You can also find relevant contacts and locations here
Showing 391-400 of 2005 search results-
Product
Maritime Protection Nitrogen generator system
The system is designed to protect transportation of flammable and sensitive cargo. As an inert gas medium, nitrogen is the purest, and thereby the preferred solution for applications where cargo contamination could be an issue.
-
Product
Dry inert gas generator
Vessels carrying liquefied gas need an inerting solution to prevent explosion on sea voyage just before and after dry-docking. This can be achieved by keeping the oxygen level below 1% in the cargo area.
-
Product
Inert gas generator solutions
Vessels carrying cargos that produce hydrocarbon vapors require an inerting solution to eliminate the risk of explosions and fires in the cargo tanks. This can be achieved by keeping the oxygen content below 8%,a standard set by the International Maritime Organisation (IMO).
-
Product
Deck foam system
The Unitor Low Expansion Foam fire extinguishing system (Unitor Low Foam system) uses a non-toxic foam concentrate, water and air to effectively extinguish fires in open spaces. The system provides safe and effective protection, and is harmless to the crew and environment.
-
Product
Fixed high expansion foam system
The Unitor high expansion foam fire extinguishing system (Unitor high foam system) uses foam consisting of a synthetic foam concentrate, water and air, which is highly effective for machinery space applications. The system is designed as total flooding system for machinery spaces of Category A, cargo pump rooms and other enclosed spaces onboard vessels and offshore installations.
-
Product
Inergen system
The Unitor Inergen® system is a fire extinguishing solution for enclosed spaces. Inergen® is a clean agent consisting of only atmospheric gases and can be applied on merchant marine and offshore structures.
-
Product
1230 clean agent system
The Unitor 1230 system has been industralised and adjusted for the offshore and maritime industry based on the Novec 1230 system. It is designed as a total flooding system for machinery spaces, pump rooms, compressor rooms and control rooms. The solution is particulary suited for rooms with sensitive equipment and vessels where space is limited.
-
Product
Dry chemical powder system
The Unitor dry chemical powder fire extinguishing system (Unitor DCP system) is designed for use on “B” and “C” class fires. The system uses dry powder which breaks down the chemical reaction within the fire and subsequently suppresses the flames almost immediately.
-
Product
CO₂ system
The Unitor CO2 system is a total flooding system designed to suppress fires in machinery spaces of Category A, engine rooms, pump rooms and cargo holds. It has been supplied to hundreds of vessels and offshore installations worldwide.
-
Product
Deep Fat Cooking system
The Unitor Deep Fat Cooking fire extinguishing system is designed for galley’s deep fat fryers onboard ships and offshore installations.
-
CUFF PACKAGE F/VL303 ATEX NEEDLE SCALER
-
VL303 ATEX ARRESTOR CLAMP ASSEMBLY
-
SERVICE KIT FOR VL223/203
-
PLASTIC BALLS 6MM FOR LOW/VIB NEEDLE SCALER, 5 PCS
-
NEEDLES 3MM FOR NS-PRO SERIES
-
NEEDLES 4MM FOR NS-PRO SERIES
-
SERVICE KIT VALVE BODY
-
BERYLLIUM COPPER NEEDLES 3x180MM
-
CHISEL TIPPED NEEDLES 3X180MM
-
SERVICE KIT FOR VL303