Last updated: 13/03/2023 09:19:07
CUTTING DISCS INOX 125X2,5X22, 25 PCS
Product Code
- Product group:
- 401
- Product number:
- 633595
UNITOR cutting and grinding consumables: High quality cutting and grinding wheels ensure the highest possible degree of efficiency without compromising on operator safety. Size: INOX 5" 125X2,5X22.
Product information
Unitor abrasive discs are ideal to be used with electrical or air operated angle grinders.
Standard depressed wheels with medium bonding for general use on a variety of metals.
Supplied in pack of 25 pcs for cutting discs, 10 pcs for grinding discs and 10 pcs for mop discs.
Features
- Manufactured in accordance with EN 12413
- Expiry date marking on centre of disc metal ring and product label
- Iron free abrasive discs
- Inox depressed wheels with soft bonding for use on stainless steel and high alloy stainless steel
- The soft bonding also enables the Inox wheels to be used on aluminium
Benefits
- Compatible with UNITOR Air Tools especially on matching RPM for safe use onboard
- Solution for standardization of Air Tools and Abrasive Consumables with worldwide availability
Specification
General
| Invent Hazard Material (IMO/EU) classification | NA |
|---|
Documents
Directions for use
Abrasive consumables are relatively fragile and should be stored and handled with care.
Abrasive discs should be stored in a clean, dry location, away from water or chemical products (solvents), and where they will not be exposed to frost or high humidity. Store at temperatures between 10°C and 30°C and relative humidity between 45% and 65%.
Incorrect storage of the abrasive discs (except cup wire brush) in open area will cause the disc’s resin to absorb moisture over a period of time and this will deteriorate the product quality resulting in disc failure. Before abrasive discs are used, it should be inspected to ensure that it has not been damaged in storage or transit and do not have any defects.
Manufacturer’s instructions should be followed on the selection of the correct type of abrasive consumables for the job in hand. Always ensure that the disc size and RPM speed matches the air tool’s size and RPM specifications. An abrasive disc should not be mounted on an air tool for which it is unsuitable.
