Last updated: 19/11/2024 02:01:10
NAVACLEAN 801 - ALKATUFF 25 LTR
Product Code
- Product group:
- 020
- Product number:
- 4000006
Powerful water based alkaline based cleaner for cleaning of cargo holds after coal, pet coke cargoes, other oily cargoes, and residues.
Product information
Navaclean 801 Alkatuff is a very powerful alkaline water based cleaner, based on strong anionic surface active agents and sodium hydroxide. Does not contains any hydrocarbon solvents, which makes it not harmful to the environment.
Features
- Strong water based alkaline cleaner and degreaser for cleaning cargo holds after coal, pet coke cargoes, other oily cargoes, and residues
- Excellent deodorising properties, removing odours of aromatic solvents, fish oil residues and other obnoxious smells
Benefits
- Cleans coal, pet coke, and numerous other cargoes
- Concentrated cleaning agent
- Can be diluted with water for multiple cleaning purposes
- Approved according to IMO MEPC.1/Circ. 590.; and complies to Marpol Annex V
Specification
General
Invent Hazard Material (IMO/EU) classification | C-49 |
---|
Physical properties
Appearance | Clear light yellow liquid |
---|---|
Density [g/ml] | 1.2-1.3 |
Materials compatibility | Avoid contact with aluminum, tin, zinc, or their alloys |
Odour | None |
pH | 13-14 |
Performance data
Pump Speed [cpm] |
---|
Safety Data Sheet (SDS)
Documents
Directions for use
Pre-wash
- Before cleaning with Navaclean 801 throughout prewashing with sea water supplemented by manual scrubbing/rubbing with brushes/squeegees is recommended. Pay special attention to the upper reaches of the holds are washed thoroughly to dislodge any residues.
- If cleaning from coal or Pet coke, it is not recommended to wash down prior to application of chemicals, as this will potentially (very likely) cause the remaining stains to adhere (embed) further into the cargo hold surface and thereby reduce the efficiency of Navaclean 801.
General cleaning recommendation:
- Apply Navaclean 801 mixed 10 to 25% (ratio 1:9 to 1:3) in water, using spray equipment. If combined with Navaclean 904 – Foam Agent, the chemicals will adhere longer to the surface and thereby prolong the working period and thereby optimizing the cleaning effect. Leave for 30 – 45 minutes.
- Wash down with a Hold Cleaning Gun. For the best result, direct the jet at the lower parts of the hold first and wash upwards. If required, manual scrubbing with brushes or squeegees is to be performed simultaneously.
- Repeat the procedure if necessary