Last updated: 19/11/2024 02:01:10
NAVACLEAN 802 - ALKATUFF SOFT 25 LTR
Product Code
- Product group:
- 020
- Product number:
- 4000011
Navaclean 802 is a strong alkaline water based cleaner and degreaser for removing coal, petcoke, and even Navadan Hold Coat. A versatile product suitable for multiple residues type.
Product information
Navaclean 802 is a highly concentrated, strong alkaline water based cleaner and degreaser ideal for removal of coal, petcoke, odours and even Navadan Hold Coat. It degreases multiple surfaces very efficiently, due to its high concentration of active ingredients and surfactants.
Features
- Strong alkaline cleaner based on sodium hydroxide
- Not harmful to environment
- Biodegradable
Benefits
- Highly concentrated that can be diluted with water for multiple cleaning purposes
- Versatile product suitable for mulitple residues type
- Can be discharged according to IMO MEPC.1/Circ. 590. and Marpol Annex V
Specification
General
| Invent Hazard Material (IMO/EU) classification | C-49 |
|---|
Physical properties
| Appearance | Clear colorless liquid |
|---|---|
| Density [g/ml] | 1.20-1.35 |
| Materials compatibility | Avoid contact with aluminum, tin, zinc or their alloys |
| Odour | None |
| pH | 13-14 |
Safety Data Sheet (SDS)
Documents
Directions for use
Pre-wash
- Before cleaning with Navaclean 802 thorough pre-washing with sea water supplemented by manual scrubbing/ rubbing with brushes/squeegees is recommended. Pay special attention to that the upper reaches of the holds are washed thoroughly in order to dislodge any residues.
- If cleaning from coal or Pet coke, it is not recommended to wash down prior application of chemicals, as this will potentially (very likely) cause there main stains to adhere (embed) further into the cargo hold surface and thereby reduce the efficiency of Navaclean 802 .
General Cleaning recommendation:
- Apply Navaclean 802 mixed 10 to 25% (ratio 1:9 to 1:3) in water, using spray equipment. If combined with Navaclean 904, the chemicals will adhere longer to the surface and thereby gain a longer working period and thereby optimizing the cleaning effect. Leave for 30 – 45 minutes. Ensure that the surface remains wet.
- Wash down with a Hold Cleaning Gun. For best results, direct the jet at the lowest parts of the hold first and work upwards.
