Last updated: 19/11/2024 02:01:11
NAVACLEAN 848 - NEUTRAL CLEANING CONCENTRATE 25 LTR
Product Code
- Product group:
- 030
- Product number:
- 4000046
Navaclean 848 Neutral cleaning concentrate is a water based hydrocarbon free tank cleaner, for cleaning of lube oils, gas oil, hydrocarbon products and chemicals. It can clean vegetable oils, animal oils, fish oils and mineral oils as well as fats where cleaning with NAVACLEAN 801 – ALKATUFF or NAVACLEAN 803 – ALKATUFF PHS is not possible.
Product information
Navaclean 848 neutral cleaning concentrate is a water based hydrocarbon free tank cleaner, specially for cleaning of lube oils, gas oil, hydrocarbon products and chemical. It can clean vegetable oils, animal oils, fish oils and mineral oils as well as fats where cleaning with NAVACLEAN 801 – ALKATUFF or NAVACLEAN 803 – ALKATUFF PHS is not possible. Can also be used for cleaning of phthalates, paraffin as well as obnoxious smell; and as hydrocarbon remover.
Features
- Based on highly efficient dissolving and low foaming non-ionic surface active agents
- Suitable for cleaning tanks coated with Zinc-Silicate coated tanks and all common metals
- May be mixed with Sodium- or Potassium Hydroxide to make a more efficient alkaline cleaner
- May be mixed with Citric-, Phosphoric- or Nitric Acid to make a more efficient acid based cleaner
- Completely miscible with sea water and fresh water
Benefits
- Does not contain nonyl phenol ethoxylates or other estrogenic compounds
- Contains no solvents, acids, alkalies and phosphates
- Suitable for use with seawater
- IMO approved and listed in Annex 10 of the MEPC.2/ Circular
Specification
General
| Invent Hazard Material (IMO/EU) classification | C-49 |
|---|
Physical properties
| Appearance | Colorless liquid |
|---|---|
| Density [g/ml] | 1.01-1.05 |
| Flash Point [°C] | >65 |
| pH | 6.0-7.0 |
Safety Data Sheet (SDS)
Documents
Directions for use
Pre-cleaning of Tanks
- Before cleaning with NAVACLEAN 848 – NEUTRAL CLEANING CONCENTRATE it is recommended, for non-drying oils, to pre-wash the tanks with hot water at 50°C. For drying oils and semi-drying oils the pre-cleaning should be made with ambient water and it should be carried out immediately after completion of discharge of the cargo in order to retard the oxidation and hardening of oil residues.
Recirculation Method
- NAVACLEAN 848 – NEUTRAL CLEANING CONCENTRATE should be recirculated as a 0.5% solution for a period of 2-6 hours. The water temperature should be approx. 35-60°C. After chemical cleaning the tanks should be rinsed thoroughly with sea water, fresh water or di-water depending on availability and requirement.
** The maximum concentration is 10% and a maximum temperature of 60°C
