Last updated: 19/11/2024 02:01:12
NAVACLEAN 856 - ECOCLEAN 25 LTR
Product Code
- Product group:
- 030
- Product number:
- 4000061
Navaclean 856 Ecoclean is a highly concentrated multipurpose water based cleaner for cargo tanks, which removes oil or dirt from any surfaces.
Product information
Navaclean 856 Ecoclean is a well balanced combination of natural citrus oil solvents, and advanced wetting agents, giving the product its power as a superior high quality water based cleaner and degreaser based on aliphatic/aromatic hydrocarbons, non-ionic and anionic surface active agents. It can effectively remove any oil and dirt from any surfaces.
Features
- Approved according to IMO MEPC.1/Circ. 590 and Marpol Annex V
- Promotes pleasant and healthy environment
- Safe for use to operating crew
Benefits
- Numerous marine cleaning & degreasing applications in engine room, galley, deck general cleaning
- Self splitting after cleaning
- Non flammable, low toxic
- Biodegradable
- Safe for use on zinc silicate coatings and most common metal surfaces.
Specification
General
Invent Hazard Material (IMO/EU) classification | C-49 |
---|
Physical properties
Appearance | Colorless to pale yellow liquid |
---|---|
Density | 1.0-1.1 |
Materials compatibility | May soften rubber. Limited application on epoxy coatings. |
pH | 7-8 |
Safety Data Sheet (SDS)
Documents
Directions for use
Tank Cleaning Cargo tank cleaning after mineral, animal, fish and vegetable oils. Hydrocarbon freeing after cleaning with hydrocarbon solvent based cleaners like NAVACLEAN 888 – SEACLEAN, NAVACLEAN 818 – COLDWASH, etc.
Direct Injection Method This will require a solution strength between 0.5 and 1%.
Recirculation Method Use a solution strength between 0.5 and 2% The solution can be re-used until it is no longer effective.
Spot Cleaning Depending upon the contamination NAVACLEAN 856 – ECOCLEAN should be sprayed undiluted or diluted down to 10% in water and allowed to soak on the area for 20 – 30 minutes. It must then be washed down with plenty water. The efficiency is increased by using warm water up to 60°C both for cleaning and when rinsing the surfaces.
** The maximum concentration is 10% and a maximum temperature of 60°C.