Last updated: 06/11/2024 02:05:36
NAVACLEAN 865 - CC BOOSTER 25 LTR
Product Code
- Product group:
- 030
- Product number:
- 4000066
Navaclean 865 CC booster is specially designed to boost Navaclean Alkaline, acid and solvent cleaners. Specially designed to work with following IMO approved Navadan Chemicals: NAVACLEAN 801 – ALKATUFF NAVACLEAN 802 – ALKATUFF SOFT NAVACLEAN 803 – ALKATUFF PHS NAVACLEAN 818 – COLD WASH NAVACLEAN 873 – RUST & STAIN REMOVER NAVACLEAN 874 – RS BASIC NAVACLEAN 888 – SEACLEAN NAVACLEAN 897 – IGS CLEANER
Product information
Navaclean 865 CC booster is formulated based on highly efficient dissolving and low foaming ionic & non-ionic surfactants, and an effective cleaner for stubborn hydrocarbon products and chemical cargo residues. It can clean vegetable oils, animal oils, fish oils and mineral oils as well as fats; and also used for cleaning of phthalates, paraffin as well as obnoxious smell. Navaclean 865 can be mixed with Sodium- or Potassium Hydroxide to make a more efficient alkaline cleaner. And it also can be mixed with Citric-, Phosphoric- or Nitric Acid to make a more efficient acid based cleaner.
Features
- Can be used directly or as a boosting agent
- Based on highly efficient dissolving and low foaming ionic and non-ionic surfactants
- Direct use: can be used for cleaning after vegetable oils, animal oils, fats, wax, and light mineral oils on pH sensitive coatings
Benefits
- Very versatile and economical to use
- Highly concentrated, low dosage required
- Suitable for use with seawater and fresh water.
- Approved according to IMO MEPC.1/Circ. 590 and complies to Marpol Annex V
- Suitable for cleaning tanks coated with Zinc-Silicate coated tanks and all common metals
Specification
General
Invent Hazard Material (IMO/EU) classification | C-49 |
---|
Physical properties
Appearance | Pale yellow liquid |
---|---|
Density [g/ml] | 1.01-1.05 |
Materials compatibility | May soften rubber |
pH | 5-6 |
Safety Data Sheet (SDS)
Documents
Directions for use
1. BOOSTING Mix NAVACLEAN 865 - CC BOOSTER with the chemical wash solution at a dosage of 0.1 – 0.5 %. Recirculate the chemical wash solution in tanks to be cleaned, according to directions for use for the primary tank cleaning chemical.
2. DIRECT USE Pre-Cleaning of tanks Before commencing with recirculation of NAVACLEAN 865 - CC BOOSTER it is recommended, for non-drying oils, to pre-wash the tanks with hot water at 50°C. For drying oils and semi-drying oils the pre-cleaning should be made with ambient water and it should be carried out immediately after completion of discharge of the cargo in order to retard the oxidation and hardening of oil residues.
Recirculation Method A chemical solution should be prepared and recirculated via vessel’s tank washing system. Depending on the degree of contamination NAVACLEAN 865 - CC BOOSTER should be recirculated as a 0.3 - 0.7% solution for a period of 2-6 hours. The water temperature should be approx. 35-65°C. After completion of the recirculation period the tanks must be rinsed thoroughly with either sea or fresh water.