Last updated: 23/01/2025 09:44:37
NAVACLEAN 856 - ECOCLEAN 200 LTR
Product Code
- Product group:
- 030
- Product number:
- 4000062
Navaclean 856 Ecoclean is a highly concentrated multipurpose water based cleaner for cargo tanks, which removes oil or dirt from any surfaces.
Product information
Navaclean 856 Ecoclean is a well balanced combination of natural citrus oil solvents, and advanced wetting agents, giving the product its power as a superior high quality water based cleaner and degreaser based on aliphatic/aromatic hydrocarbons, non-ionic and anionic surface active agents. It can effectively remove any oil and dirt from any surfaces.
Features
- Approved according to IMO MEPC.1/Circ. 590 and Marpol Annex V
- Promotes pleasant and healthy environment
- Safe for use to operating crew
Benefits
- Numerous marine cleaning & degreasing applications in engine room, galley, deck general cleaning
- Self splitting after cleaning
- Non flammable, low toxic
- Biodegradable
- Safe for use on zinc silicate coatings and most common metal surfaces.
Specification
General
| Invent Hazard Material (IMO/EU) classification | C-49 |
|---|
Physical properties
| Appearance | Colorless to pale yellow liquid |
|---|---|
| Density [g/ml] | 1.0-1.1 |
| Materials compatibility | May soften rubber. Limited application on epoxy coatings. |
| pH | 7-8 |
Safety Data Sheet (SDS)
Documents
Directions for use
Tank Cleaning: Cargo tank cleaning after mineral, animal, fish and vegetable oils. Hydrocarbon freeing after cleaning with hydrocarbon solvent based cleaners like NAVACLEAN 888 – SEACLEAN, NAVACLEAN 818 – COLDWASH, etc.
Direct Injection Method: This will require a solution strength between 0.5 and 1%.
Recirculation Method: Use a solution strength between 0.5 and 2% The solution can be re-used until it is no longer effective.
Spot Cleaning: Depending upon the contamination NAVACLEAN 856 – ECOCLEAN should be sprayed undiluted or diluted down to 10% in water and allowed to soak on the area for 20 – 30 minutes. It must then be washed down with plenty water. The efficiency is increased by using warm water up to 60°C both for cleaning and when rinsing the surfaces.
** The maximum concentration is 10% and a maximum temperature of 60°C.
